Home › Thread milling cutters
Thread milling cutters
Ten standard series from M0.8 to M36 in single-tooth, three-tooth and full-thread geometries, plus extended-reach and 3×D / 4×D versions. One cutter covers a range of thread sizes at the same pitch, and tool breakage may leave the part recoverable, depending on the damage and application. Selected full-thread sizes extend to M80 depending on pitch.
Series overview
| Series | Models | Thread range |
|---|---|---|
| Single-Tooth Thread Mill | 37 | M0.8 × P0.2 to M36*P4.0 |
| Three-Tooth Thread Mill | 55 | M1*0.25 to M30*P3.5 |
| Full-Thread Mill | 40 | M1.6*0.35 to M30*P3.5 |
| Extended Single-Tooth Thread Mill | 24 | M1.4*P0.3 to M18*P2.5 |
| Extended Three-Tooth Thread Mill | 26 | M1.6*P0.35 to M14-M16*P2 |
| Single-Tooth 3×D | 6 | M2.5*P0.45 to M6*P1 |
| Single-Tooth 4×D | 8 | M1.4*0.3 to M6*P1 |
| Three-Tooth 3×D | 8 | M1.4*0.3 to M6*P1 |
| Three-Tooth 4×D | 8 | M1.4*0.3 to M6*P1 |
| 60° Single-Tooth Range Thread Mill | 16 | 32-56 TPI / P0.5-0.8 to P2.0-6.0 |
Full size tables for every series are in the product specifications PDF (43 pages, no prices).
Specification reads cutting diameter × effective length × shank × overall length × teeth, in millimetres. Aluminium and steel geometries are supplied separately. Inch pitch is covered by the 60° range series.
Cutting a thread that is not listed?
Send the thread callout, the material and the depth. Taper and special profiles are made to drawing.